IP65 Tri-Proof Lights
The second digit in IP65 is jetting, not immersion. A washdown hose at a 6.3 mm nozzle and 12.5 L/min is the IPX5 test condition; if the line actually soaks the fixture or uses hot high-pressure water, you need IP66 / IP69K — IP65 will not hold.
Get a QuoteKey parameters
| Power | 20–40 W |
|---|---|
| Luminous flux | 2,600–5,000 lm |
| Dimensions | 600 / 1200 / 1500 mm |
| IP rating | IP65 |
| First digit: solids | 6 / 完全防尘 |
| Second digit: water | 5 / 喷水 |
| Impact rating | IK08 |
The two IP digits govern two different things
This page is IP65: first digit 6 / 完全防尘 (solids), second 5 / 喷水 (water). The common misreading is to treat it as one water-resistance score. The first digit is about dust and finger access; only the second is about water, and it grades **how the water arrives** — dripping, spraying, jetting, powerful jetting, and a close-range high-pressure hot jet are five different things.
The other point that gets missed: the rating applies to the complete fixture — terminal chamber, cable entry and breather included — not to the housing material. An IP65 fixture with a loose cable gland has already failed, whatever rating was specified.
Same power, different site
At 20–40 W and 2,600–5,000 lm, an IP65 fixture reaches some sites and not others. The test is not "is this IP high enough" but three questions: where does the water come from, does it arrive with pressure, and does it pool on the floor. One "with pressure" answer and you step up a level.
One more that has nothing to do with IP and is just as fatal: ambient temperature. In a sealed chamber at 20–40 W, every 10 ℃ above the rated ambient roughly halves driver life. On hot sites check the ta rating and the measured driver case temperature together — IP alone misses half the problem.
Four things to verify before ordering
① Whether flux and efficacy are quoted for the complete fixture or the light source — a 10–15% difference that changes the fixture count. ② Whether colour temperature and CRI are measured or nominal values; mixed CCT within one batch is the most common arrival dispute. ③ Driver brand and model, plus its derating curve at high temperature — it is the only part that really sets life. ④ The mounting kit list: chain, bracket and anchors in the box, or the site stops for a day.
Concepts on this page
Need a Lighting Plan?
Tell us your scenario, Jie Zhai will help you choose.
Get a Quote All specification pages